Opal Heat Transfer Craft Vinyl TW | 10" x 12" Sheet

Opal Heat Transfer Craft Vinyl TW | 10" x 12" Sheet

• Compatible with Craft Cutters, Die Cutters, Sign Plotters, etc.
• Mirror/Reverse your image design.
• Place vinyl face down onto cutting mat .
• Adjust proper blade speed and cutting pressure .
• Weed all of the excess slowly, leave the delicate design letters or graphics.
• Make sure the finished product is facing the right way once ironed onto your fabric.
• Lay out the fabric and place the t-shirt or fabric on a hard, flat,  clean and dry surface.
• Place a cardboard to protect transferred image onto both sides of t-shirt.
• Set a heat press machine or iron to 150℃(302℉) to 160℃(320℉) .
• Press it only for 8-12 seconds at medium pressure.
• Iron on the clear glossy side. Do not use steam iron.
• Iron evenly. Be sure to consistently apply pressure so the complete image is fully attached and to prevent scorching the paper and cracking the image.
• *** Wait for the vinyl to completely COOL and gently peel off the backing after few minutes***

**A test cut is always recommended**

Please also note that colors appear slightly different on computer monitors and these are very color shifting.

If you purchase more than one sheet of the same color, it may or may not be a continuous piece.